WHITE OAK LATTICE TRIVETS: FINISHED

I finally finished my last set of trivet’s and there different because of a couple of reasons.

• Made from solid white oak

• These trivet’s will be sold as a set of 3

• There is 2 sizes in the set a big one at 14-1/2” and the smaller trivet is 7” sq.

I did make a set of plans that I will be making available in my shop soon and the plans detail how to make both sizes.

Trivet Dimension Details:

14-1/2” x 7” x 3/4” (Long Trivet)

7”x 7” x 3/4” (Short Trivet)

Tools Needed

• Table-saw

• 1/2” wide dado stack

• A power sander , I used a random orbital sander

Finish Used

I used a 1:1 ratio of oil based polyurethane & mineral spirits, I applied 2 coats sanding between each coat with 320 grit sand paper and then finally burnished the trivet with 0000 steel wool.

Here is the completed trivet set.

Here is a top view of the larger trivet

Here is a top view of the smaller trivets

Here is a view of the bottom of the trivet set

Here is the bottom view of the larger trivet

Here is a view of the bottom faces of the smaller trivets, I actually like this side of the trivet, but I guess I like the top face more.

I will be making the plans available soon and these trivet set’s will also be available in my Etsy store and my shop here, I hope to have all these items posted in the next few days.

Thanks for reading and see you next.