WHITE OAK LATTICE TRIVETS: FINISHED

I finally finished my last set of trivet’s and there different because of a couple of reasons.

  • Made from solid white oak

  • These trivet’s will be sold as a set of 3

  • There is 2 sizes in the set a big one at 14-1/2” and the smaller trivet is 7” sq.

I did make a set of plans that I will be making available in my shop soon and the plans detail how to make both sizes.

Trivet Dimension Details:

14-1/2” x 7” x 3/4” (Long Trivet)

7”x 7” x 3/4” (Short Trivet)

Tools Needed

  • Table-saw

  • 1/2” wide dado stack

  • A power sander , I used a random orbital sander

Finish Used

I used a 1:1 ratio of oil based polyurethane & mineral spirits, I applied 2 coats sanding between each coat with 320 grit sand paper and then finally burnished the trivet with 0000 steel wool.

Here is the completed trivet set.

Here is the completed trivet set.

Here is a top view of the larger trivet

Here is a top view of the larger trivet

Here is a top view of the smaller trivets

Here is a top view of the smaller trivets

Here is a view of the bottom of the trivet set

Here is a view of the bottom of the trivet set

Here is the bottom view of the larger trivet

Here is the bottom view of the larger trivet

Here is a view of the bottom faces of the smaller trivets, I actually like this side of the trivet, but I guess I like the top face more.

Here is a view of the bottom faces of the smaller trivets, I actually like this side of the trivet, but I guess I like the top face more.

I will be making the plans available soon and these trivet set’s will also be available in my Etsy store and my shop here, I hope to have all these items posted in the next few days.

Thanks for reading and see you next.