Handmade Craft Beer Flight with glasses

28CD38E4-F7B4-4147-A26B-34DF511B7106-COLLAGE.jpg
image-59731.png
image-59651.png
image-59690.png
image-59759.png
image-59784.png
image-59839.png
28CD38E4-F7B4-4147-A26B-34DF511B7106-COLLAGE.jpg
image-59731.png
image-59651.png
image-59690.png
image-59759.png
image-59784.png
image-59839.png

Handmade Craft Beer Flight with glasses

45.00
Quantity:
Made from Solid Hardwoods
 
 

This handcrafted craft beer flight sampler is made from 3 species of wood, Brazilian Sapelle, Curly Maple and Walnut. 

My process for making this flight involved gluing up multiple strips which made the flight blank, it was then cut to size while maintaining the wood grain orientated around all sides of the flight creating that visual appeal. The legs were cut and then shaped using a lot of different tools including hand and machine tools. The sides are attached to the underside of the flight using a joint called a dado joint and then glued in place. No fasteners were used in the making of this product. Finally finishing the product with 3 coats of oil based polyurethane sanding in between each coat with 400 grit sand paper.

The flight measures approx 13" x 4" x 2-1/4" high, it has 4 holes which is 2" in diameter.

***4 Glasses ARE included with this beer flight, and they are 5oz. beer sampler glasses. 

This item was finished with 3 coats of oil based polyurethane, I chose this finish because of its protection properties.
As it is expected that spills, drips, and condensation from glasses will occur, it is recommended that any wet spots be wiped up with a rag and not left sitting on the flight. Doing so will preserve the life of the finish and the wood itself. 

***Wooden flight is NOT dishwasher safe.