Handmade Craft Beer Flight (No Glasses incl.)

image-59934.png
image-21986.png
image-59953.png
image-59934.png
image-21986.png
image-59953.png

Handmade Craft Beer Flight (No Glasses incl.)

35.00
Quantity:
Made from Solid Hardwood
 
 

This handcrafted craft beer flight is made from 2 species of wood, Brazilian Sapelle, & Curly Maple.

My process for making this flight involved gluing up multiple strips which made the flight blank, it was then cut to size while maintaining the wood grain orientated around all sides of the flight creating that visual appeal. The legs were cut and then shaped using a lot of different tools including hand and machine tools. The sides are attached to the underside of the flight using a joint called a dado joint and then glued in place. No fasteners were used in the making of this product. Finally finishing the product with 3 coats of oil based polyurethane sanding in between each coat with 400 grit sand paper.

The flight measures approx 13" x 3" x 2-1/4" high, it has 4 holes which is 2" in diameter.

This item was finished with 3 coats of oil based polyurethane, I chose this finish because of its protection properties.

As it is expected that spills, drips, and condensation from glasses will occur, it is recommended that any wet spots be wiped up with a rag and not left sitting on the flight. Doing so will preserve the life of the finish and the wood itself.

***Wooden flight is NOT dishwasher safe.

****** NO GLASSES INCLUDED*****